|
|
 EXHAUST
GAS TEMPERATURE SENSOR
The
Exhaust Gas Temperature Sensor is used in high temperature
applications. A typical installation of this type of device
is in the engine exhaust header.
The E.G.T. device is
made of stainless steel to assure years of durability.
The device is connected to a control air system via tubing
and fittings. At a predetermined temperature the eutectic
solder will melt creating a pressure drop in the pneumatic
control system. This pressure drop can be used to shut
down the equipment or sound an alarm.
• Total Reliability
• No Maintenance
• No Calibration
• No Deterioration
• Reusable
• Device can be reloaded quickly and easily at our
factory. |
| Standard
Sizes in Stock
|
Length
(L) |
Standard
Part No. |
*E.G.T.
w/ Slot |
| 1-1/4" |
300408 |
--- |
| 4" |
300417 |
300428 |
| 5" |
300431 |
300430 |
| 6" |
300418 |
350426 |
| 7" |
300419 |
300414 |
| 8" |
350198 |
300416 |
| 9" |
--- |
350418 |
|
Approximate
Overall Length - 2-5/8" plus (L)
Special sizes available on request.
Allow for additional delivery time.
Please specify melting temperature
desired.
*To be used in applications where
external venting is required; such
as flammable media. |
|
|
| Available
Melting Temperatures
|
| 1170°F |
1300°F |
| When ordering, specify one of the temperatures listed. |
|
|
|
Details
of Installation
E.G.T. direct installation:
Use 1/4" n.p.t. pipe coupling, weld to exhaust pipe,
and drill 7/16" hole through exhaust pipe.
E.G.T. with slot for use with a Thermowell:
To install E.G.T. into Thermowell, insert sensor and tighten
to maximum of 10 foot-pounds. Use no sealants on the probe
end threads. Connect control media via tubing and
fittings.
For Thermowell, see "Thermowell - Details of Installation."
Thermowell (L) length equivalent to Exhaust Gas Temperature
Sensor (L) length.
|
